There are plenty of manufacturers that produce a wide variety of quality heating and air conditioning units. Test your unit in early spring to make sure it works properly and once again during the fall months. HVAC units tend to act a little sluggish when they are not used for a while.
There are several simple troubleshooting tips that can help people tackle heating system repair in Archbold OH before calling a professional.
Triggered circuit breaker
If the unit is not running at all, check to see if a circuit breaker has tripped. A tripped circuit breaker will not allow power to reach the unit. Check all circuit breakers and reset them, if necessary.
Check the thermostat
Make sure the thermostat is set to heat and not cool. If the unit does not turn on automatically, it may still be set to its summer settings. Also, check the temperature settings; If the ambient air temperature is below the set temperature, the unit will not turn on. Adjust the thermostat, if necessary.
Check and see if the unit is running
If your home is still not warming up, check to ensure that both the indoor and outdoor units are running. If the outside system does not work, but the indoor system is, the system must be reset. Turn off the unit for one to three hours to allow the system to reboot.
If you are not comfortable doing this, hire a professional to perform Heating System Repair in Archbold OH.
Check the airflow in and around the furnace
HVAC units do not work effectively with dirty, clogged filters. This causes excessive wear on the unit because it has to work harder to heat or cool the home. If the airflow is blocked, the house will not cool down. If the furnace filters are clogged, airflow will be restricted.
Change the furnace filters and keep them clean to maintain efficient operating conditions. Remove all stacked items in and around the furnace to promote better airflow to the unit.
Check the outdoor unit
Do not allow grass, weeds or trash to block the unit. Airflow to the outdoor unit should not be limited or the unit may not work properly. Visit website for more details.